Connecting the Display degetal LG
Before
setting up the monitor, ensure that the power to the monitor,
the
computer system, and other attached devices are turned off.
Connecting and Disassembling the stand
Place the monitor face down on the soft cloth-
2.
Assemble
the Stand Base into the Stand Body in the correct direction.
3.
Turn
the Stand Base Lock through 90° to fix the Stand Base to the Stand Body.
4.
Once
assembled, lift the monitor up carefully.
5. Turn
the Stand Base Lock through 90° to separate the Stand Base from the Stand Body.
If you can't release the Stand
Base even the Locking Knob is at a release position, Please push the indicated
knob down and retry it.
6.
Pull out the
Stand Base to remove.
IMPORTANT
-
This picture depicts the general
model of connection. Your monitor may differ from the items shown in the
picture.
-
Do not carry the product upside
down holding only the stand base. The product may fall and get damaged or cause
injury.
the
computer system, and other attached devices is turned off.
Positioning your display
-After installation, adjust the angle as shown below.
1. Adjust
the position of the panel in various ways for maximum comfort. Tilt Range :
-5°~15°
Do not touch or press the screen when adjusting the angle of
the monitor.
ERGONOMIC
It is recommended that in order to
maintain an ergonomic and comfortable viewing position, the forward tilt angle
of the monitor should not exceed 5 degrees
Connecting with the PC
1. Before
setting up the monitor, ensure that the power to the monitor, the computer system,
and other attached devices is turned off.
2. Connect
signal input cable and power cord in order, then tighten the screw of the
signal cable
A
B
A - Connect
D-sub(Analog signal) Cable
B - Connect DVI-D(Digital signal) Cable
NOTE
This is a simplified
representation of the rear view.
This rear view represents a general model; your
display may differ from the view as shown.
3. Press
the power button on the front panel to turn the power on. When monitor power is
turned on, the 'Self Image Setting Function' is executed
automatically.
(Only Analog Mode)
NOTE
‘ Self Image Setting Function’? This
function provides the user with optimal display settings.When the user connects
the monitor for the first time, this function automatically adjusts the display
to optimal settings for individual input signals.
‘AUTO/SET’ Function? When
you encounter problems such as blurry screen, blurred letters, screen flicker
or tilted screen while using the device or after changing screen resolution,
press the AUTO/SET function button to improve resolution.
|
|
|
|
|
|
|
|
|
LG, LG , LG electronics, electronics, consumer electronics
LG Algéri, Life, Good - téléphonie, smart tv, informatique, électroménager, tv, audio, video , LG Algérie
GSM,LG,gsm,phone,cellphone,information,info,opinion,review,digital phone
0 التعليقات:
Post a Comment